MOTION TECHNOLOGY BLDC MOTORS & DRIVES DESIGN&DEVELOPMENT IN TESLA EMS

BLDC Motors

These 3-phase brushless DC motors are particularly suitable for applications with high rupture and service life.In addition to the high-performance standard version, the series can also be equipped with customer-specific adaptations (electrical and mechanical).By installing an encoder, these motors can be used as servo drive in conjunction with 4Q servo controllers.

  • Features
  • voltage 1-500 VDC
  • Diameter 30 mm to 300 mm
  • speeds in the range from 1-20000 rpm
  • torques 0.5 Nm to 20 Nm
  • high efficiency
  • low power consumption
  • combined with worm gear or planetary gear
  • protection up to IP65
  • two-sided ball bearing

Your benefits

  • High service life in indoor and outdoor applications
  • Suitable for intermittent movements
  • Reduced energy consumption due to intelligent motion control
  • Integration of specific with various software functions

BLDC Motors with integrated drive control electronics

These 3-phase brushless DC motors with integrated 1Q electronics are particularly suitable for applications with high running and service life. Functionalities such as change of direction, speed control and soft start cover the electronics and ensure simple commissioning with minimal wiring.

  • Features:
  • integrated 1-Q control electronics
  • reversal of rotation (even at full speed)
  • speed control via set point input (0 to 5 VDC)
  • current limit
  • ramp
  • enable terminal
  • error detection (current limitation, under voltage)
  • voltage 1-500 VDC
  • Diameter 30 mm to 300 mm
  • speeds in the range from 1-20000 rpm
  • torques 0.5 Nm to 20 Nm
  • high efficiency
  • low power consumption
  • combined with worm gear or planetary gear
  • protection up to IP65
  • two-sided ball bearing

Your benefits

  • No additional driver and control system required
  • High service life in indoor and outdoor applications
  • Suitable for intermittent movements
  • Reduced energy consumption due to intelligent motion control
  • Integration of specific with various software functions

BLDC Drives

brushlesh dc motor drive controller
  • Rated Capacity 12KW
  • Input Voltage 12 – 480V DC
  • Rated Current (Max.) 100 Amp
  • Starting current Not exceeding 2 times of nominal current
  • Over current Limit 20% of nominal
  • Speed Range up to 20000 RPM(±–%)
  • Over voltage Limit 10% of nominal voltage.
  • Motor feedback Hall effect sensors
  • Commutation Trapezoidal
  • Mode of operation Velocity mode(closed loop control)
  • Features Solid state type, Soft switching, Alarm/Status monitoring, EMI/EMC compatible.
  • Input signals Run/Stop, Emergency stop.
  • Display/Indications LCD display for voltage, current, frequency & speed.
  • Operating temp./Humidity 0 – 75oC/ 95(+/-3%)
BLDC DRIVE CONTROLLER

AC Drives

  • Rated Capacity 5KW
  • Input Voltage 220AC,50Hz
  • Rated Current (Max.) 30 Amp
  • Starting current Not exceeding 2 times of nominal current
  • Over current Limit 20% of nominal
  • Speed Range up to 20000 RPM(±–%)
  • Over voltage Limit 10% of nominal voltage.
  • Motor feedback Hall effect sensors
  • Commutation Trapezoidal
  • Mode of operation Velocity mode(closed loop control)  
  • Features Solid state type, Soft switching, Alarm/Status monitoring, EMI/EMC compatible.
  • Input signals Run/Stop, Emergency stop.
  • Display/Indications LCD display for voltage, current, frequency & speed.
  • Operating temp./Humidity 0 – 75oC/ 95(+/-3%)